Sample Work

June 24, 2021 in News Tags:

Different woods have different colored stains. To directly determine the color, try to start from a small area in a not very conspicuous place, for example, behind the cupboard. When you get the desired color of the wood, consider further work to avoid having to leave the premises at the colored floor. When using water-based stains should consider how to prevent the occurrence of double bands density of color. For this to work wet floor, and in the paint on the wet boundary of the previous pass. Shake the bottle of stain and pour it into the trough.

Do not pour liquid directly on the floor. Dip the spatula and run a straight line on the floor. Driving with a spatula on the growth of fibers. When you're done in one pass, wipe the excess stain with a parquet floor with a rag. Continue until the entire floor will be processed. If the the first try did not work as they should, you can once again walk stain to achieve a darker color.

After the first time, leave the floor to dry for 3 hours, then start with a discreet corner for the sample thickness. After the second time again, let dry for 3 hours. If you need to repeat the operation more than once, the drying time before the final passage – 24 hours. Before the second and third passes stained lightly sand the floor somewhere on the side. If coverage is not frozen finally, sticks or drags on, give a few more hours to dry.

Comments are closed.